Manually installing a (persistent) Firewall Rule to allow IPFIX on the ESX Host

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

I have been playing around with vRNI last week and before I am going to write an article about some use cases and about the features I am first going to tell you what I had to do to actually make it work.

One very important thing is that IPFIX traffic needs to be able to flow from wherever to the vRNI proxy. Of course IPFIX needs to be enabled as well and if everything goes right vRNI will enable IPFIX and do the necessary things in order to make it work the moment you configure Data Sources.

For me this was unfortunately not the case.

After troubleshooting this with some internal VMware guys it appeared that vRNI did not automatically created the firewall rule to permit UDP/2055 (IPFIX). After removing / re-enabeling the DataSource a few times the rule still was not added.

So I decided to add it in myself. So I used google again and I stumbled onto this and this article.

Adding a rule to the ESX server by altering the /etc/vmware/firewall/rules.xml file will not make the change persistent. When the host gets a reboot the newly added rule will be deleted.

So I used Google again and I stumbled onto this and this article.

Even tough this is documented I still thought this could be documented in a better fashion so this where the steps that I took to add the IPFIX rule in and make it persistent:

Download Download SUSE Linux Enterprise Server 11 SP2
Install SUSE Linux Enterprise Server 11 SP2
Install the prerequisites for installing the VIB Author fling
Install the VIB Author fling
Create the directory structure needed
Create a descriptor.xml file
Create the .xml file with the actual firewall rule
Create the VIB and offline VIB
Get the VIB of the SUSE Linux Enterprise Server and place it on the ESX Host
Install the VIB
Verify if the firewall rule is there

Download Download SUSE Linux Enterprise Server 11 SP2

Because the recommended platform to use the VIB Author fling is SUSE Linux Enterprise Server 11 SP2 I am downloading this from here.

Install SUSE Linux Enterprise Server 11 SP2

When you install the VM just use default settings to create the initial VM and during the installation. After installing the machine just boot it and SSH into it with using the IP Address. For some reason I had problems finding the IP address but eventually I needed to open the Terminal type in "su" enter the password and type in "ifconfig".

Install the prerequisites for installing the VIB Author fling

After logging into the machine with SSH I started to install the prerequisites that are needed for the VIB Author Fling. Some of the prerequisites where already in by default and other where not.

148:/home/administrator # zypper install python
Loading repository data...
Reading installed packages...
'python' is already installed.
No update candidate for 'python-2.6.0-8.12.2.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install python-lxml
Loading repository data...
Reading installed packages...
Resolving package dependencies...

The following NEW packages are going to be installed:
  python-lxml pyxml

root ##b##2 new packages to install.
Overall download size: 1.5 MiB. After the operation, additional 6.9 MiB will be used.
Continue? [y/n/?] (y): y
Retrieving package pyxml-0.8.4-194.23.38.x86_64 (1/2), 1013.0 KiB (4.8 MiB unpacked)
Retrieving package python-lxml-2.1.2-1.20.x86_64 (2/2), 562.0 KiB (2.1 MiB unpacked)
Installing: pyxml-0.8.4-194.23.38 [done]
Installing: python-lxml-2.1.2-1.20 [done]

148:/home/administrator # zypper install python-urlgrabber
Loading repository data...
Reading installed packages...
Resolving package dependencies...

The following NEW packages are going to be installed:
  python-curl python-urlgrabber

root ##b##2 new packages to install.
Overall download size: 131.0 KiB. After the operation, additional 445.0 KiB will be used.
Continue? [y/n/?] (y): y
Retrieving package python-curl-7.19.0-5.2.1.2.x86_64 (1/2), 50.0 KiB (138.0 KiB unpacked)
Retrieving package python-urlgrabber-3.9.1-0.1.2.x86_64 (2/2), 81.0 KiB (307.0 KiB unpacked)
Installing: python-curl-7.19.0-5.2.1.2 [done]
Installing: python-urlgrabber-3.9.1-0.1.2 [done]
148:/home/administrator # zypper install coreutils
Loading repository data...
Reading installed packages...
'coreutils' is already installed.
No update candidate for 'coreutils-8.12-6.19.1.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install binutils
Loading repository data...
Reading installed packages...
'binutils' is already installed.
No update candidate for 'binutils-2.21.1-0.7.25.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install tar
Loading repository data...
Reading installed packages...
'tar' is already installed.
No update candidate for 'tar-1.26-1.2.4.1.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install bash
Loading repository data...
Reading installed packages...
'bash' is already installed.
No update candidate for 'bash-3.2-147.9.13.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install grep
Loading repository data...
Reading installed packages...
'grep' is already installed.
No update candidate for 'grep-2.7-5.5.61.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install file
Loading repository data...
Reading installed packages...
'file' is already installed.
No update candidate for 'file-4.24-43.19.1.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install sed
Loading repository data...
Reading installed packages...
'sed' is already installed.
No update candidate for 'sed-4.1.5-85.22.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install gzip
Loading repository data...
Reading installed packages...
'gzip' is already installed.
No update candidate for 'gzip-1.3.12-69.19.1.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install openssl
Loading repository data...
Reading installed packages...
'openssl' is already installed.
No update candidate for 'openssl-0.9.8j-0.26.1.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.

148:/home/administrator # zypper install zlib
Loading repository data...
Reading installed packages...
'zlib' is already installed.
No update candidate for 'zlib-1.2.3-106.34.x86_64'. The highest available version is already installed.
Resolving package dependencies...

root ##b##Nothing to do.
148:/home/administrator #

Install the VIB Author fling

administrator # rpm -ivh vmware-esx-vib-author-5.0.0-0.0.847598.i386.rpm
root ##b##Preparing...                ########################################### [100%]
   1:vmware-esx-vib-author  ########################################### [100%]
148:/home/administrator #

Create the directory structure needed

According to this article a directory structure needed to be created.

148:/ # mkdir stage

148:/ # mkdir stage/payloads

148:/ # mkdir stage/payloads/payload1

148:/ # mkdir stage/payloads/payload1/etc

148:/ # mkdir stage/payloads/payload1/vmware

148:/ # mkdir stage/payloads/payload1/vmware/firewall

Create a descriptor xml file

Before you create a .vib file you need to create a descriptor.xml file and mine looked like this:

/stage/descriptor.xml - the descriptor.xml file

vib version="5.0">
  <type>bootbank</type>
  <name>ipfix</name>
  <version>5.0.0-0.0.1</version>
  <vendor>IwanHoogendoorn</vendor>
  <summary>Custom VIB from Iwan Hoogendoorn</summary>
  <description>Adds custom firewall rule for ipfix</description>
  <relationships>
    <depends>
    </depends>
    <conflicts/>
    <replaces/>
    <provides/>
    <compatibleWith/>
  </relationships>
  <software-tags>
  </software-tags>
  <system-requires>
    <maintenance-mode>false</maintenance-mode>
  </system-requires>
  <file-list>
  </file-list>
  <acceptance-level>community</acceptance-level>
  <live-install-allowed>true</live-install-allowed>
  <live-remove-allowed>true</live-remove-allowed>
  <cimom-restart>false</cimom-restart>
  <stateless-ready>true</stateless-ready>
  <overlay>false</overlay>
  <payloads>
    <payload name="payload1" type="vgz"></payload>
  </payloads>
</vib>

This file should be placed in the /stage directory

Create the xml file with the actual firewall rule

My .xml file with the rule looked like this:

/stage/payloads/payload1/vmware/firewall/ipfix.xml - the ipfix.xml file

<ConfigRoot>

  <service id='0042'>
     <id>ipfix</id>
     <rule id='0000'>
        <direction>inbound</direction>
        <protocol>udp</protocol>
        <porttype>dst</porttype>
        <port>2055</port>
     </rule>
     <rule id='0001'>
        <direction>outbound</direction>
        <protocol>udp</protocol>
        <porttype>dst</porttype>
        <port>2055</port>
     </rule>
     <enabled>true</enabled>
     <required>false</required>
  </service>

</ConfigRoot>

This file should be placed in the /stage/payloads/payload1/vmware/firewall/ directory.

Create the vib and offline vib

148:/ # vibauthor -C -t stage -v ipfix.vib -O ipfix-offline-bundle.zip -f
root ##b##Successfully created ipfix.vib.
root ##b##Successfully created ipfix-offline-bundle.zip.
148:/ #

A copy of my vib + offline bundle that I created can be downloaded here--> Media:ipfix-vib-files.zip.

Get the VIB of the SUSE Linux Enterprise Server and place it on the ESX Host

I used WinSCP to transfer the files from the SUSE Linux Enterprise Server to the ESX Host.

Install the VIB

Log into the ESX host with SSH and install the VIB.

[root@dc1-pod11-esx-b-01:/etc/vmware/firewall] esxcli software vib install -v /tmp/ipfix.vib -f
Installation Result
   Message: Operation finished successfully.
   Reboot Required: false
   VIBs Installed: IwanHoogendoorn_bootbank_IpFixn_5.0.0-0.0.1
   VIBs Removed:
   VIBs Skipped:
[root@dc1-pod11-esx-b-01:/etc/vmware/firewall]

Verify if the firewall rule is there

[root@dc1-pod11-esx-b-01:/etc/vmware/firewall] more ipfix.xml
<ConfigRoot>

  <service id='0042'>
     <id>ipfix</id>
     <rule id='0000'>
        <direction>inbound</direction>
        <protocol>udp</protocol>
        <porttype>dst</porttype>
        <port>2055</port>
     </rule>
     <rule id='0001'>
        <direction>outbound</direction>
        <protocol>udp</protocol>
        <porttype>dst</porttype>
        <port>2055</port>
     </rule>
     <enabled>true</enabled>
     <required>false</required>
  </service>

</ConfigRoot>

If needed you can always remove the VIB with:

[root@dc1-pod11-esx-b-01:/etc/vmware/firewall] esxcli software vib remove --vibname=ipfix
Removal Result
   Message: Operation finished successfully.
   Reboot Required: false
   VIBs Installed:
   VIBs Removed: ipfix_bootbank_ipfix_5.0.0-0.0.1
   VIBs Skipped: